• Manufacturer:
    Zanardi
  • Model:
    CTP3 1L/4 (60 Hz)
  • Weight:
    74.00 kg
  • Dimensions (L х W х H):
    586.00 x 451.00 x 451.00 mm
  • Pole number:
    4
  • Phase number:
    3
  • Prime Power 3 phase (kVA):
    12
  • Prime Power 1 phase (kVA):
    8.4
  • Frequency (Hz):
    60
  • Overspeed (RPM):
    1800
  • Maximum Overspeed (RPM):
    2250
  • Voltage (V):
    480/277
  • Power factor:
    0.8
  • Voltage range (V):
    254,265,277,440,460,480
  • Efficiencies (%):
    87.5
  • Number of wires:
    6
  • Execution:
    Brushless
  • Winding pitch:
    2/3
  • Insulation class:
    H
  • Protection class:
    IP23
  • NDE Bearing type:
    6305-2RS
  • DE Bearing type:
    6308-2RS
  • Altitude (m):
    0-1000
  • Balancing:
    ISO1940-1
  • Air volume (m3/min):
    4
  • Noise (7m, dBA):
    60
  • Noise (1m, dBA):
    78

The CTP3 alternators have the regulation compound system is three-phase, these are brushless alternators at 2/4 pole.

Self regulating and incorporate a rotating inductor with damper cage winding and a fixed stator with skewed slots.

The stator windings have a shortened pitch to reduce the harmonic content of the output waveform. The alternators are made in compliance with the 2006/42, 2006/95, 2004/108 directives and their amendments, and the CEI 2-3, IEC 34-1, VDE 0530, BS4999-5000, EN 60034-1 regulations.

Tests to verify the electromagnetic compability have been carried out in the foreseen conditions by the standards with the neutral connected to the earth.

The robust mechanical construction gives good access to the generator output connections, and allows the user to inspect the various components with ease.

The casing is made of steel, the shields of cast iron, and the shaft of C45 steel and it has a keyed fan.

The mechanical protection level meets standard IP23 (upon request higher levels of protection can be supplied).

Insulation materials meet Class H requirements, and all rotating components are epossy resins impregnated, higher voltage parts, such as the stators, are vacuum-treated (special treatments are available on request).

The CTP3 alternators comply with the EEC directives 2006/42-2006/95-2004/108 and their amendments; therefore they pose no danger to the operator if they are installed, used and maintained according to the instructions given by Zanardi and provided the safety devices are kept in perfect working conditions.

Alternator Zanardi CTP3 1L/4 (60 Hz) - dimensions